ACDP Module 13-VW/Audi Gearbox Clone supports VW (Volkswagen), Audi DQ200 (0AM / 0CW), DQ250 (02E / 0D9), DL382 (0CK), DL501 (0B5), VL381 (0AW) models and etc. This post will share the test report on Audi VL381 (0AW) gearbox clone.
ACDP Module 13-VW/Audi Gearbox Clone supports VW (Volkswagen), Audi DQ200 (0AM / 0CW), DQ250 (02E / 0D9), DL382 (0CK), DL501 (0B5), VL381 (0AW) models and etc. This post will share the test report on Audi VL381 (0AW) gearbox clone.
This is Audi VL381 (0AW) gearbox
Plug the Yanhua ACDP module 13-VL381 interface board into gearbox
Make sure the red cap on OBP+ICP adapter is in JOIN position
Connect Mini ACDP with OBP+ICP adapter and connect to module 13 via cable
Start to read data from this original gearbox 1
Select VW-> Gearbox Clone-> Audi-> VL381 (0AW)-> Full Backup
Read out the system info is VL381
Then read PFLASH and EEPROM data
Save the chip data read out
Next, plug module 13 into the donor gearbox 2
Select “Full Write”
Confirm the system info and continue
Select the original backup file to write
Write data successfully
Result: Yanhua Mini ACDP with module 13 have success in gearbox clone on Audi VL381 (0AW)
Yanhua ACDP VW/Audi Gearbox Clone Module 13 with License A600:
https://www.yanhuaacdp.com/wholesale/acdp-gearbox-clone-module-for-vw-audi.html
Yanhua Mini ACDP Programming Master Basic Version with License A801:
https://www.yanhuaacdp.com/wholesale/yanhua-mini-acdp-basic-moduel.html
Source:http://blog.yanhuaacdp.com/mini-acdp-clone-gearbox-on-audi-vl381-0aw-without-soldering/
No comments:
Post a Comment