Good news!!! Yanhua Tech released a new function for ACDP Module 38. Now it can work with Mini ACDP/ACDP-2 to reset mileage for BMW G classis BDC2 immobilizer system on bench. This function has been added under the [Add Key] menu. Check the step-by-step guide below.
Requirements:
- Yanhua Mini ACDP or Mini ACDP2 device
- Yanhua Module 38 with license A503
- BMW G chassis BDC2 module (remove from the 2016-2021 car)
Operation guide:
Make sure the BMW BDC2 module is removed from the vehicle
Connect Yanhua ACDP and module 38 interface board to BDC2 module correctly
Open Mini ACDP APP
Ensure the ACDP device is bound to the APP
Select BMW-> FEM/BDC-> IMMO/Mileage->BDC2 ICP+OBD (F/G Chassis) -> Add Key-> Reset Mileage
Back up the coding data before proceeding, then reset the KM data, and write the coding data
Yanhua ACDP BMW BDC2 Mileage Reset Car List:
| Model | Chassis Number | Year Range |
| 5 Series | G30 | 2016/11-2020/06 |
| 5 Series | G31 | 2017/03–2020/06 |
| 5 Series | G38 | 2017/05-2020/08 |
| 6 Series | G32 | 2017/07-2020/06 |
| 7 Series | G11/G12 | 2015/07-2019/02 |
| M5 | F90 | 2017/11-2020/06 |
| X3/IX3 | G08 | 2018/05-2021/08 |
| X3 | F97 | 2019/04-2021/07 |
| X3 | G01 | 2017/12-2021/07 |
| X4 | G02 | 2018/04-2021/07 |
| X4 | F98 | 2019/04-2021/07 |
| Rolls-Royce | 2018- |
Note:
If you want to correct odometer for F classis 35128WT or 35160WT EEPROM and G classis VDO, please use the Yanhua YH35XX Programmer & Simulator, no risk and no red dot on odometer.
http://blog.eobdtool.co.uk/how-to-correct-odometer-for-35128wt-with-yh35xx-programmer-simulator/
No comments:
Post a Comment